Prevent forbid from being ignored if overriden at the same level.

That is, this changes `#[forbid(foo)] #[allow(foo)]` from allowing foo to
forbidding foo.

Author: pnkfelix

Diff for: compiler/rustc_lint/src/levels.rs

@@ -10,6 +10,7 @@ use rustc_hir as hir;
 use rustc_hir::def_id::{CrateNum, LOCAL_CRATE};
 use rustc_hir::{intravisit, HirId};
 use rustc_middle::hir::map::Map;
+use rustc_middle::lint::LevelSource;
 use rustc_middle::lint::LintDiagnosticBuilder;
 use rustc_middle::lint::{struct_lint_level, LintLevelMap, LintLevelSets, LintSet, LintSource};
 use rustc_middle::ty::query::Providers;
@@ -95,6 +96,44 @@ impl<'s> LintLevelsBuilder<'s> {
         self.sets.list.push(LintSet::CommandLine { specs });
     }
 
+    /// Attempts to insert the `id` to `level_src` map entry. If unsuccessful
+    /// (e.g. if a forbid was already inserted on the same scope), then emits a
+    /// diagnostic with no change to `specs`.
+    fn insert_spec(
+        &mut self,
+        specs: &mut FxHashMap<LintId, LevelSource>,
+        id: LintId,
+        (level, src): LevelSource,
+    ) {
+        if let Some((old_level, old_src)) = specs.get(&id) {
+            if old_level == &Level::Forbid && level != Level::Forbid {
+                let mut diag_builder = struct_span_err!(
+                    self.sess,
+                    src.span(),
+                    E0453,
+                    "{}({}) incompatible with previous forbid in same scope",
+                    level.as_str(),
+                    src.name(),
+                );
+                match *old_src {
+                    LintSource::Default => {}
+                    LintSource::Node(_, forbid_source_span, reason) => {
+                        diag_builder.span_label(forbid_source_span, "`forbid` level set here");
+                        if let Some(rationale) = reason {
+                            diag_builder.note(&rationale.as_str());
+                        }
+                    }
+                    LintSource::CommandLine(_) => {
+                        diag_builder.note("`forbid` lint level was set on command line");
+                    }
+                }
+                diag_builder.emit();
+                return;
+            }
+        }
+        specs.insert(id, (level, src));
+    }
+
     /// Pushes a list of AST lint attributes onto this context.
     ///
     /// This function will return a `BuilderPush` object which should be passed
@@ -109,7 +148,7 @@ impl<'s> LintLevelsBuilder<'s> {
     ///   `#[allow]`
     ///
     /// Don't forget to call `pop`!
-    pub fn push(
+    pub(crate) fn push(
         &mut self,
         attrs: &[ast::Attribute],
         store: &LintStore,
@@ -221,7 +260,7 @@ impl<'s> LintLevelsBuilder<'s> {
                         let src = LintSource::Node(name, li.span(), reason);
                         for &id in ids {
                             self.check_gated_lint(id, attr.span);
-                            specs.insert(id, (level, src));
+                            self.insert_spec(&mut specs, id, (level, src));
                         }
                     }
 
@@ -235,7 +274,7 @@ impl<'s> LintLevelsBuilder<'s> {
                                     reason,
                                 );
                                 for id in ids {
-                                    specs.insert(*id, (level, src));
+                                    self.insert_spec(&mut specs, *id, (level, src));
                                 }
                             }
                             Err((Some(ids), new_lint_name)) => {
@@ -272,7 +311,7 @@ impl<'s> LintLevelsBuilder<'s> {
                                     reason,
                                 );
                                 for id in ids {
-                                    specs.insert(*id, (level, src));
+                                    self.insert_spec(&mut specs, *id, (level, src));
                                 }
                             }
                             Err((None, _)) => {

Diff for: compiler/rustc_middle/src/lint.rs

@@ -9,7 +9,7 @@ use rustc_session::lint::{builtin, Level, Lint, LintId};
 use rustc_session::{DiagnosticMessageId, Session};
 use rustc_span::hygiene::MacroKind;
 use rustc_span::source_map::{DesugaringKind, ExpnKind, MultiSpan};
-use rustc_span::{Span, Symbol};
+use rustc_span::{symbol, Span, Symbol, DUMMY_SP};
 
 /// How a lint level was set.
 #[derive(Clone, Copy, PartialEq, Eq, HashStable)]
@@ -25,6 +25,24 @@ pub enum LintSource {
     CommandLine(Symbol),
 }
 
+impl LintSource {
+    pub fn name(&self) -> Symbol {
+        match *self {
+            LintSource::Default => symbol::kw::Default,
+            LintSource::Node(name, _, _) => name,
+            LintSource::CommandLine(name) => name,
+        }
+    }
+
+    pub fn span(&self) -> Span {
+        match *self {
+            LintSource::Default => DUMMY_SP,
+            LintSource::Node(_, span, _) => span,
+            LintSource::CommandLine(_) => DUMMY_SP,
+        }
+    }
+}
+
 pub type LevelSource = (Level, LintSource);
 
 pub struct LintLevelSets {

Diff for: src/test/ui/lint/issue-70819-dont-override-forbid-in-same-scope.rs

@@ -0,0 +1,49 @@
+// This test is checking that you cannot override a `forbid` by adding in other
+// attributes later in the same scope. (We already ensure that you cannot
+// override it in nested scopes).
+
+// If you turn off deduplicate diagnostics (which rustc turns on by default but
+// compiletest turns off when it runs ui tests), then the errors are
+// (unfortunately) repeated here because the checking is done as we read in the
+// errors, and curretly that happens two or three different times, depending on
+// compiler flags.
+//
+// I decided avoiding the redundant output was not worth the time in engineering
+// effort for bug like this, which 1. end users are unlikely to run into in the
+// first place, and 2. they won't see the redundant output anyway.
+
+// compile-flags: -Z deduplicate-diagnostics=yes
+
+fn forbid_first(num: i32) -> i32 {
+    #![forbid(unused)]
+    #![deny(unused)]
+    //~^ ERROR: deny(unused) incompatible with previous forbid in same scope [E0453]
+    #![warn(unused)]
+    //~^ ERROR: warn(unused) incompatible with previous forbid in same scope [E0453]
+    #![allow(unused)]
+    //~^ ERROR: allow(unused) incompatible with previous forbid in same scope [E0453]
+
+    num * num
+}
+
+fn forbid_last(num: i32) -> i32 {
+    #![deny(unused)]
+    #![warn(unused)]
+    #![allow(unused)]
+    #![forbid(unused)]
+
+    num * num
+}
+
+fn forbid_multiple(num: i32) -> i32 {
+    #![forbid(unused)]
+    #![forbid(unused)]
+
+    num * num
+}
+
+fn main() {
+    forbid_first(10);
+    forbid_last(10);
+    forbid_multiple(10);
+}

Diff for: src/test/ui/lint/issue-70819-dont-override-forbid-in-same-scope.stderr

@@ -0,0 +1,29 @@
+error[E0453]: deny(unused) incompatible with previous forbid in same scope
+  --> $DIR/issue-70819-dont-override-forbid-in-same-scope.rs:19:13
+   |
+LL |     #![forbid(unused)]
+   |               ------ `forbid` level set here
+LL |     #![deny(unused)]
+   |             ^^^^^^
+
+error[E0453]: warn(unused) incompatible with previous forbid in same scope
+  --> $DIR/issue-70819-dont-override-forbid-in-same-scope.rs:21:13
+   |
+LL |     #![forbid(unused)]
+   |               ------ `forbid` level set here
+...
+LL |     #![warn(unused)]
+   |             ^^^^^^
+
+error[E0453]: allow(unused) incompatible with previous forbid in same scope
+  --> $DIR/issue-70819-dont-override-forbid-in-same-scope.rs:23:14
+   |
+LL |     #![forbid(unused)]
+   |               ------ `forbid` level set here
+...
+LL |     #![allow(unused)]
+   |              ^^^^^^
+
+error: aborting due to 3 previous errors
+
+For more information about this error, try `rustc --explain E0453`.

Diff for: src/tools/clippy/tests/ui/attrs.rs

@@ -3,7 +3,6 @@
 // Test that the whole restriction group is not enabled
 #![warn(clippy::restriction)]
 #![deny(clippy::restriction)]
-#![forbid(clippy::restriction)]
 #![allow(clippy::missing_docs_in_private_items, clippy::panic, clippy::unreachable)]
 
 #[inline(always)]

Diff for: src/tools/clippy/tests/ui/attrs.stderr

@@ -1,21 +1,21 @@
 error: you have declared `#[inline(always)]` on `test_attr_lint`. This is usually a bad idea
-  --> $DIR/attrs.rs:9:1
+  --> $DIR/attrs.rs:8:1
    |
 LL | #[inline(always)]
    | ^^^^^^^^^^^^^^^^^
    |
    = note: `-D clippy::inline-always` implied by `-D warnings`
 
 error: the since field must contain a semver-compliant version
-  --> $DIR/attrs.rs:29:14
+  --> $DIR/attrs.rs:28:14
    |
 LL | #[deprecated(since = "forever")]
    |              ^^^^^^^^^^^^^^^^^
    |
    = note: `-D clippy::deprecated-semver` implied by `-D warnings`
 
 error: the since field must contain a semver-compliant version
-  --> $DIR/attrs.rs:32:14
+  --> $DIR/attrs.rs:31:14
    |
 LL | #[deprecated(since = "1")]
    |              ^^^^^^^^^^^
@@ -37,13 +37,5 @@ LL | #![deny(clippy::restriction)]
    |
    = help: try enabling only the lints you really need
 
-error: restriction lints are not meant to be all enabled
-  --> $DIR/attrs.rs:6:11
-   |
-LL | #![forbid(clippy::restriction)]
-   |           ^^^^^^^^^^^^^^^^^^^
-   |
-   = help: try enabling only the lints you really need
-
-error: aborting due to 6 previous errors
+error: aborting due to 5 previous errors