Added .gitattributes
=================
Драйвер позволяет управлять RGB лентой на светодиодах WS2811/WS2812 подключенной к ESP8266 с прошивкой McLighting
The driver allows you to control the RGB strip on the LEDs WS2811/WS2812 connected to the ESP8266 with firmware McLighting
Set brightness.
Where is the brightness as value 0-255.
Set speed.
Where is the speed from 0 to 255.
Set mode.
Where is one of the following:
- off (Turn all LEDs off.)
- all (Turn all LEDs on in the given or previously set color.)
- wipe (Turn all LEDs on in the given or previously set color, with wipe effect.)
- rainbow (Starts rainbow effect.)
- rainbowCycle (Starts rainbow cycle effect.)
- theaterchase (Starts theaterchase effect in the given or previously set color.)
- theaterchaseRainbow (Starts theaterchase effect with changing colors.)
- tv (Starts TV simulator.)
Light multiple LEDs in the given colors.
+[numled][hexrgb]+[numled][hexrgb]+[numled][hexrgb] [...] or
[numled][hexrgb],[numled][hexrgb],[numled][hexrgb],[...]
Where is the number of the led (starting with 00), e.g. 01.
Where is the color as HEX, e.g. 04d2ff.
Example: +09ffffff+19ff0000 OR 09ffffff,19ff0000
Set default color of the lamp.
Where <r,g,b> is the color as number (0 - 255), e.g. 32,3,200
If active mode 0 (Static) - Set default color of the lamp and light all LEDs in that color.
Set default color of the lamp.
Where <r(g)(b)> is the color as number (0 - 255), e.g. 154
If active mode 0 (Static) - Set default color of the lamp and light all LEDs in that color.
Set default color of the lamp.
Where is the color as HEX, e.g. 04d2ff
If active mode 0 (Static) - Set default color of the lamp and light all LEDs in that color.
List of avilable animation modes as array. Result:
[
{
"mode": 0,
"name": "Static"
},
{
"mode": 1,
"name": "Blink"
},
{
"mode": 2,
"name": "Breath"
},
...
]
Light multiple LED ranges in the given colors.
R[rangstart_led][rangend_led][hexrgb]R[rangstart_led][rangend_led][hexrgb]R[rangstart_led][rangend_led][hexrgb] [...] or
[rangstart_led][rangend_led][hexrgb],[rangstart_led][rangend_led][hexrgb],[rangstart_led][rangend_led][hexrgb],[...]
Where <rangstart_led> is the start number of the range (numbers starting with 00), e.g. 00.
Where <rangend_led> is the end number of the range (numbers starting with 00), e.g. 09.
Where is the color as HEX, e.g. 04d2ff.
Can be repeated multiple times.
Example: R0009ffffffR1019ff0000 OR 0009ffffff,1019ff0000 lights the first 10 LEDs white and the next 10 red
Set default color of the lamp and light all LEDs in that color.
Where is the color as HEX, e.g. 04d2ff
Light single LEDs in the given color.
Where is the number of the led (starting with 00), e.g. 01.
Where is the color as HEX, e.g. 04d2ff.
Set animation mode.
Where <animation_mode_id> is on from the list_modes
Current name fx_mode
- (instalator) fix error, added ping pong function for reconnect
- (instalator) fix error
- (instalator) fix error, change README
- (instalator) Release version
- (instalator) initial