fix(esp32p4): Fix lib builder errors

Author: lucasssvaz

cores/esp32/esp32-hal-i2c-slave.c

@@ -47,6 +47,19 @@
 #include "esp32-hal-log.h"
 #include "esp32-hal-i2c-slave.h"
 #include "esp32-hal-periman.h"
+#include "esp_private/periph_ctrl.h"
+
+#if SOC_PERIPH_CLK_CTRL_SHARED
+#define I2C_CLOCK_SRC_ATOMIC() PERIPH_RCC_ATOMIC()
+#else
+#define I2C_CLOCK_SRC_ATOMIC()
+#endif
+
+#if !SOC_RCC_IS_INDEPENDENT
+#define I2C_RCC_ATOMIC() PERIPH_RCC_ATOMIC()
+#else
+#define I2C_RCC_ATOMIC()
+#endif
 
 #define I2C_SLAVE_USE_RX_QUEUE 0  // 1: Queue, 0: RingBuffer
 
@@ -535,10 +548,14 @@ static bool i2c_slave_set_frequency(i2c_slave_struct_t *i2c, uint32_t clk_speed)
   i2c_hal_clk_config_t clk_cal;
 #if SOC_I2C_SUPPORT_APB
   i2c_ll_master_cal_bus_clk(APB_CLK_FREQ, clk_speed, &clk_cal);
-  i2c_ll_set_source_clk(i2c->dev, SOC_MOD_CLK_APB); /*!< I2C source clock from APB, 80M*/
+  I2C_CLOCK_SRC_ATOMIC() {
+    i2c_ll_set_source_clk(i2c->dev, SOC_MOD_CLK_APB); /*!< I2C source clock from APB, 80M*/
+  }
 #elif SOC_I2C_SUPPORT_XTAL
   i2c_ll_master_cal_bus_clk(XTAL_CLK_FREQ, clk_speed, &clk_cal);
-  i2c_ll_set_source_clk(i2c->dev, SOC_MOD_CLK_XTAL); /*!< I2C source clock from XTAL, 40M */
+  I2C_CLOCK_SRC_ATOMIC() {
+    i2c_ll_set_source_clk(i2c->dev, SOC_MOD_CLK_XTAL); /*!< I2C source clock from XTAL, 40M */
+  }
 #endif
   i2c_ll_set_txfifo_empty_thr(i2c->dev, a);
   i2c_ll_set_rxfifo_full_thr(i2c->dev, SOC_I2C_FIFO_LEN - a);

cores/esp32/esp32-hal-i2c.c

@@ -29,6 +29,19 @@
 #include "hal/i2c_ll.h"
 #include "driver/i2c.h"
 #include "esp32-hal-periman.h"
+#include "esp_private/periph_ctrl.h"
+
+#if SOC_PERIPH_CLK_CTRL_SHARED
+#define I2C_CLOCK_SRC_ATOMIC() PERIPH_RCC_ATOMIC()
+#else
+#define I2C_CLOCK_SRC_ATOMIC()
+#endif
+
+#if !SOC_RCC_IS_INDEPENDENT
+#define I2C_RCC_ATOMIC() PERIPH_RCC_ATOMIC()
+#else
+#define I2C_RCC_ATOMIC()
+#endif
 
 #if SOC_I2C_SUPPORT_APB || SOC_I2C_SUPPORT_XTAL
 #include "esp_private/esp_clk.h"
@@ -388,7 +401,9 @@ esp_err_t i2cSetClock(uint8_t i2c_num, uint32_t frequency) {
       periph_rtc_dig_clk8m_enable();
     }
 #endif
-    i2c_hal_set_bus_timing(&(hal), frequency, i2c_clk_alloc[src_clk].clk, i2c_clk_alloc[src_clk].clk_freq);
+    I2C_CLOCK_SRC_ATOMIC() {
+      i2c_hal_set_bus_timing(&(hal), frequency, i2c_clk_alloc[src_clk].clk, i2c_clk_alloc[src_clk].clk_freq);
+    }
     bus[i2c_num].frequency = frequency;
     //Clock Stretching Timeout: 20b:esp32, 5b:esp32-c3, 24b:esp32-s2
     i2c_set_timeout((i2c_port_t)i2c_num, I2C_LL_MAX_TIMEOUT);

libraries/PPP/src/PPP.cpp

@@ -7,6 +7,7 @@
 #include <string>
 #include "driver/uart.h"
 #include "hal/uart_ll.h"
+#include "esp_private/uart_share_hw_ctrl.h"
 
 #define PPP_CMD_MODE_CHECK(x)                                    \
   if (_dce == NULL) {                                            \
@@ -653,7 +654,10 @@ bool PPPClass::setBaudrate(int baudrate) {
     log_e("uart_get_sclk_freq failed with %d %s", err, esp_err_to_name(err));
     return false;
   }
-  uart_ll_set_baudrate(UART_LL_GET_HW(_uart_num), (uint32_t)baudrate, sclk_freq);
+
+  HP_UART_SRC_CLK_ATOMIC() {
+    uart_ll_set_baudrate(UART_LL_GET_HW(_uart_num), (uint32_t)baudrate, sclk_freq);
+  }
 
   return true;
 }