Skip to content

Latest commit

 

History

History
221 lines (160 loc) · 8.47 KB

rust-on-xtensa.md

File metadata and controls

221 lines (160 loc) · 8.47 KB

Deprecated

Installation instructions moved to: esp-rs/rust-build

Rust on ESP32 and ESP32-S series (Xtensa)

Following instructions are specific for ESP32 and ESP32-S series based on Xtensa architecture.

Instructions for ESP-C series based on RISC-V architecture are described in document for ESP32-C3.

Quick start

The installation process of ready to use custom build of Rust and LLVM is described here:

Troubleshooting

Can't find crate for std

Make sure to install Rust toolchain nightly:

rustup toolchain install nightly

Missing nightly toolchain might result in following error:

error[E0463]: can't find crate for `std`
  |
  = note: the `xtensa-esp32-none-elf` target may not be installed

Error: use of unstable library feature 'restricted_std'

Error message:

Compiling rustlib v0.1.0 (rust-esp32-example-main/components/rustlib)
error[E0658]: use of unstable library feature 'restricted_std'
  |
  = help: add `#![feature(restricted_std)]` to the crate attributes to enable

error: aborting due to previous error

For more information about this error, try `rustc --explain E0658`.
error: could not compile `rustlib`

Solution:

Change the target to xtensa-esp32-espidf.

Build fails with panic at libclang error

If you see the following error:

error: failed to run custom build command for `rustlib v0.1.0 (/home/brian/src/esp32-rust/rust-esp32-example/components/rustlib)`

Caused by:
  process didn't exit successfully: `/home/user/projects/rust-esp32-example/build/esp-idf/rustlib/target/release/build/rustlib-435225cb26b45082/build-script-build` (exit status: 101)
  --- stdout
  cargo:rerun-if-changed=/home/user/projects/rust-esp32-example/build/esp-idf/rustlib/target/RustApi.h

  --- stderr
  thread 'main' panicked at 'libclang error; possible causes include:
  - Invalid flag syntax
  - Unrecognized flags
  - Invalid flag arguments
  - File I/O errors
  - Host vs. target architecture mismatch
[...]

This likely means that the build script is finding the wrong libclang.so (or libclang.dylib on macOS) file (possibly from your system's global copy of clang). To teach the build where the correct copy of libclang is, set in your environment:

export LIBCLANG_PATH=/path/to/xtensa-esp32-elf-clang/lib/libclang.so.12

Replace the path above with the correct path on your system. Builds of LLVM project are available at espressif/llvm-project

For more details about LLVM binary artifact read Quick start section.

Building from scratch

Following text describes the build process when building LLVM and Rust from scratch.

Using Rust for ESP32 Development

Given the popularity of the ESP32 chip, there has been an interest in developing applications for it using the Rust programming language. The ESP32 has traditionally used the Xtensa instruction set, which is not officially supported by Rust.

A new version of the ESP32, the ESP32-C3, has recently been released. The new C3 variant is based on a RISC-V architecture. RISC-V is a supported architecture for LLVM and Rust. This document, however, will concern itself with the more popular and, at the time of writing, more powerful Xtensa-based systems.

Build LLVM for Xtensa

Although the Xtensa instruction set is not supported by the LLVM project, Espressif has continued to maintain a fork. Unfortunately, these changes have not been migrated upstream into the main project. This would be a prerequisite before official support in Rust is possible.

The fork is hosted at espressif/llvm-project

The Rust for for Xtensa fork (see below) includes the LLVM repo as a submodule, so it is not necessary to work with this repository directly. However, it uses an older version of the code. To use the most up to date, we can build the toolchain separately from the main repository.

Note, however, that while clang will successfully compile code, the toolchain is not able to link final executables for either the host or target systems.

% git clone https://github.com/espressif/llvm-project.git
% cd llvm-project
% mkdir build
% cd build
% cmake ../llvm -G "Ninja" -DLLVM_TARGETS_TO_BUILD="X86" -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD="Xtensa" -DLLVM_ENABLE_PROJECTS="clang" -DCMAKE_INSTALL_PREFIX=/usr/local/xtensa/llvm -DCMAKE_BUILD_TYPE=Release
% ninja
% sudo ninja install

The Xtensa target support can be verified by printing the supported target architectures.

% /usr/local/xtensa/llvm/bin/llc --version
LLVM (http://llvm.org/):
  LLVM version 12.0.1
  Optimized build.
  Default target: x86_64-apple-darwin20.3.0
  Host CPU: cascadelake

  Registered Targets:
    x86    - 32-bit X86: Pentium-Pro and above
    x86-64 - 64-bit X86: EM64T and AMD64
    xtensa - Xtensa 32

The available CPUs and features for the architecture can also be queried.

% /usr/local/xtensa/llvm/bin/llc -march=xtensa -mattr=help
Available CPUs for this target:

  esp32    - Select the esp32 processor.
  esp32-s2 - Select the esp32-s2 processor.
  esp8266  - Select the esp8266 processor.
  generic  - Select the generic processor.

Available features for this target:

  atomctl      - Enable Xtensa ATOMCTL option.
  atomctl      - Enable Xtensa MEMCTL option.
  bool         - Enable Xtensa Boolean extension.
  coprocessor  - Enable Xtensa Coprocessor option.
  debug        - Enable Xtensa Debug option.
  density      - Enable Density instructions.
  dfpaccel     - Enable Xtensa Double Precision FP acceleration.
  div32        - Enable Xtensa Div32 option.
  exception    - Enable Xtensa Exception option.
  exception    - Enable Xtensa HighPriInterrupts option.
  extendedl32r - Enable Xtensa Extended L32R option.
  fp           - Enable Xtensa Single FP instructions.
  interrupt    - Enable Xtensa Interrupt option.
  loop         - Enable Xtensa Loop extension.
  mac16        - Enable Xtensa MAC16 instructions.
  miscsr       - Enable Xtensa Miscellaneous SR option.
  mul32        - Enable Xtensa Mul32 option.
  mul32high    - Enable Xtensa Mul32High option.
  nsa          - Enable Xtensa NSA option.
  prid         - Enable Xtensa Processor ID option.
  regprotect   - Enable Xtensa Region Protection option.
  rvector      - Enable Xtensa Relocatable Vector option.
  s32c1i       - Enable Xtensa S32C1I option.
  sext         - Enable Xtensa Sign Extend option.
  threadptr    - Enable Xtensa THREADPTR option.
  timerint     - Enable Xtensa Timer Interrupt option.
  windowed     - Enable Xtensa Windowed Register option.

Use +feature to enable a feature, or -feature to disable it.
For example, llc -mcpu=mycpu -mattr=+feature1,-feature2

Build Rust for Xtensa

While it should be possible to skip the internal build of LLVM libraries and reuse the LLVM toolchain built above, that didn't work successfully. Instead, use the built in version of the toolchain.

% git clone https://github.com/MabezDev/rust-xtensa.git
% cd rust-xtensa
% git submodule update --init --recursive
% ./configure --experimental-targets=Xtensa --prefix=/usr/local/xtensa/rust
% python x.py build --stage=2

The install option for x.py runs into some problems if sudo permissions are needed (requiring cargo dependencies to be vendored), so create an install directory owned by the user.

% sudo mkdir -p /usr/local/xtensa/rust
% sudo chown `whoami` /usr/local/xtensa/rust
% python x.py install

Finally, the library source tree needed by xargo to build the core library crates needs to be copied into the installation as well.

% sudo cp Cargo.* /usr/local/xtensa/rust/
% sudo cp -r library /usr/local/xtensa/rust/

Finally, install xargo to wrap the normal cargo command.

% cargo install xargo

Using Rust

To build a Rust library for Xtensa, set up the environment for xargo to find the custom Rust toolchain and build with xargo instead of cargo.

export RUSTC=/usr/local/xtensa/rust/bin/rustc
export XARGO_RUST_SRC=/usr/local/xtensa/rust/library
xargo build --release --target=xtensa-esp32-none-elf