milk_v2.md

1. Solder headers to PCB

• headers
• with tape to hold it down
• use the pro micro to make sure tha they are aligned well
• Should look like this

2. Solder sockets to PCB

• positioned like this
• soldered
• another angle

3. Solder RGB LEDs to PCB

• The LED leg on that has a notch in the corner should align with the black silkscreen corner.
• soldered. Make sure you don't have solder going between the pads. Also, you can turn down the temperature on your iron if you are worried about burning the LED

4. Solder pro micro to headers

• position it like this.
• all soldered

5. flash with VIA QMK

• use this file here: https://github.com/keyhive/build_guides/blob/master/docs/images/v2/spaceman_2_milk_via.hex
• Use VIA to change the keycodes or LED color: https://caniusevia.com/