forked from arduino/ArduinoCore-samd
-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathboards.txt
432 lines (404 loc) · 16.7 KB
/
boards.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
# Copyright (c) 2014-2017 Arduino LLC. All right reserved.
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
# Arduino/Genuino Zero (Prorgamming Port)
# ---------------------------------------
arduino_zero_edbg.name=Arduino/Genuino Zero (Programming Port)
arduino_zero_edbg.vid.0=0x03eb
arduino_zero_edbg.pid.0=0x2157
arduino_zero_edbg.upload.tool=openocd
arduino_zero_edbg.upload.protocol=sam-ba
arduino_zero_edbg.upload.maximum_size=262144
arduino_zero_edbg.upload.use_1200bps_touch=false
arduino_zero_edbg.upload.wait_for_upload_port=false
arduino_zero_edbg.upload.native_usb=false
arduino_zero_edbg.build.mcu=cortex-m0plus
arduino_zero_edbg.build.f_cpu=48000000L
arduino_zero_edbg.build.usb_product="Arduino Zero"
arduino_zero_edbg.build.usb_manufacturer="Arduino LLC"
arduino_zero_edbg.build.board=SAMD_ZERO
arduino_zero_edbg.build.core=arduino
arduino_zero_edbg.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
arduino_zero_edbg.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
arduino_zero_edbg.build.openocdscript=openocd_scripts/arduino_zero.cfg
arduino_zero_edbg.build.variant=arduino_zero
arduino_zero_edbg.build.variant_system_lib=
arduino_zero_edbg.build.vid=0x2341
arduino_zero_edbg.build.pid=0x804d
arduino_zero_edbg.bootloader.tool=openocd
arduino_zero_edbg.bootloader.file=zero/samd21_sam_ba.bin
# Arduino/Genuino Zero (Native USB Port)
# ---------------------------------------
arduino_zero_native.name=Arduino/Genuino Zero (Native USB Port)
arduino_zero_native.vid.0=0x2341
arduino_zero_native.pid.0=0x804d
arduino_zero_native.vid.1=0x2341
arduino_zero_native.pid.1=0x004d
arduino_zero_native.vid.2=0x2341
arduino_zero_native.pid.2=0x824d
# If the board is a 2341:824d use 2341:824d for build and set other parameters as well
arduino_zero_native.vid.2.build.vid=0x2341
arduino_zero_native.vid.2.build.pid=0x824d
arduino_zero_native.vid.2.build.usb_product="Genuino Zero"
arduino_zero_native.vid.2.bootloader.file=zero/samd21_sam_ba_genuino.bin
arduino_zero_native.vid.3=0x2341
arduino_zero_native.pid.3=0x024d
# If the board is a 2341:024d use 2341:824d for build and set other parameters as well
arduino_zero_native.vid.3.build.vid=0x2341
arduino_zero_native.vid.3.build.pid=0x824d
arduino_zero_native.vid.3.build.usb_product="Genuino Zero"
arduino_zero_native.vid.3.bootloader.file=zero/samd21_sam_ba_genuino.bin
arduino_zero_native.upload.tool=bossac
arduino_zero_native.upload.protocol=sam-ba
arduino_zero_native.upload.maximum_size=262144
arduino_zero_native.upload.use_1200bps_touch=true
arduino_zero_native.upload.wait_for_upload_port=true
arduino_zero_native.upload.native_usb=true
arduino_zero_native.build.mcu=cortex-m0plus
arduino_zero_native.build.f_cpu=48000000L
arduino_zero_native.build.usb_product="Arduino Zero"
arduino_zero_native.build.usb_manufacturer="Arduino LLC"
arduino_zero_native.build.board=SAMD_ZERO
arduino_zero_native.build.core=arduino
arduino_zero_native.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
arduino_zero_native.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
arduino_zero_native.build.openocdscript=openocd_scripts/arduino_zero.cfg
arduino_zero_native.build.variant=arduino_zero
arduino_zero_native.build.variant_system_lib=
arduino_zero_native.build.vid=0x2341
arduino_zero_native.build.pid=0x804d
arduino_zero_native.bootloader.tool=openocd
arduino_zero_native.bootloader.file=zero/samd21_sam_ba.bin
# Arduino/Genuino MKR1000
# ---------------------------------------
mkr1000.name=Arduino/Genuino MKR1000
mkr1000.vid.0=0x2341
mkr1000.pid.0=0x804e
mkr1000.vid.1=0x2341
mkr1000.pid.1=0x004e
mkr1000.vid.2=0x2341
mkr1000.pid.2=0x824e
# If the board is a 2341:824e use 2341:824e for build and set other parameters as well
mkr1000.vid.2.build.vid=0x2341
mkr1000.vid.2.build.pid=0x824e
mkr1000.vid.2.build.usb_product="Genuino MKR1000"
mkr1000.vid.2.bootloader.file=mkr1000/samd21_sam_ba_genuino_mkr1000.bin
mkr1000.vid.3=0x2341
mkr1000.pid.3=0x024e
# If the board is a 2341:024e use 2341:824e for build and set other parameters as well
mkr1000.vid.3.build.vid=0x2341
mkr1000.vid.3.build.pid=0x824e
mkr1000.vid.3.build.usb_product="Genuino MKR1000"
mkr1000.vid.3.bootloader.file=mkr1000/samd21_sam_ba_genuino_mkr1000.bin
mkr1000.upload.tool=bossac
mkr1000.upload.protocol=sam-ba
mkr1000.upload.maximum_size=262144
mkr1000.upload.use_1200bps_touch=true
mkr1000.upload.wait_for_upload_port=true
mkr1000.upload.native_usb=true
mkr1000.build.mcu=cortex-m0plus
mkr1000.build.f_cpu=48000000L
mkr1000.build.usb_product="Arduino MKR1000"
mkr1000.build.usb_manufacturer="Arduino LLC"
mkr1000.build.board=SAMD_MKR1000
mkr1000.build.core=arduino
mkr1000.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
mkr1000.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mkr1000.build.openocdscript=openocd_scripts/arduino_zero.cfg
mkr1000.build.variant=mkr1000
mkr1000.build.vid=0x2341
mkr1000.build.pid=0x804e
mkr1000.bootloader.tool=openocd
mkr1000.bootloader.file=mkr1000/samd21_sam_ba_arduino_mkr1000.bin
# Arduino MKRZero
# ---------------
mkrzero.name=Arduino MKRZERO
mkrzero.vid.0=0x2341
mkrzero.pid.0=0x804f
mkrzero.vid.1=0x2341
mkrzero.pid.1=0x004f
mkrzero.upload.tool=bossac
mkrzero.upload.protocol=sam-ba
mkrzero.upload.maximum_size=262144
mkrzero.upload.use_1200bps_touch=true
mkrzero.upload.wait_for_upload_port=true
mkrzero.upload.native_usb=true
mkrzero.build.mcu=cortex-m0plus
mkrzero.build.f_cpu=48000000L
mkrzero.build.usb_product="Arduino MKRZero"
mkrzero.build.usb_manufacturer="Arduino LLC"
mkrzero.build.board=SAMD_MKRZERO
mkrzero.build.core=arduino
mkrzero.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
mkrzero.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mkrzero.build.openocdscript=openocd_scripts/arduino_zero.cfg
mkrzero.build.variant=mkrzero
mkrzero.build.vid=0x2341
mkrzero.build.pid=0x804f
mkrzero.bootloader.tool=openocd
mkrzero.bootloader.file=mkrzero/samd21_sam_ba_arduino_mkrzero.bin
# Arduino MKR FOX 1200
# --------------------
mkrfox1200.name=Arduino MKR FOX 1200
mkrfox1200.vid.0=0x2341
mkrfox1200.pid.0=0x8050
mkrfox1200.vid.1=0x2341
mkrfox1200.pid.1=0x0050
mkrfox1200.upload.tool=bossac
mkrfox1200.upload.protocol=sam-ba
mkrfox1200.upload.maximum_size=262144
mkrfox1200.upload.use_1200bps_touch=true
mkrfox1200.upload.wait_for_upload_port=true
mkrfox1200.upload.native_usb=true
mkrfox1200.build.mcu=cortex-m0plus
mkrfox1200.build.f_cpu=48000000L
mkrfox1200.build.usb_product="Arduino MKR FOX 1200"
mkrfox1200.build.usb_manufacturer="Arduino LLC"
mkrfox1200.build.board=SAMD_MKRFox1200
mkrfox1200.build.core=arduino
mkrfox1200.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
mkrfox1200.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mkrfox1200.build.openocdscript=openocd_scripts/arduino_zero.cfg
mkrfox1200.build.variant=mkrfox1200
mkrfox1200.build.vid=0x2341
mkrfox1200.build.pid=0x8050
mkrfox1200.bootloader.tool=openocd
mkrfox1200.bootloader.file=mkrfox1200/samd21_sam_ba_arduino_mkrfox1200.bin
# Arduino MKR GSM 1400
# --------------------
mkrgsm1400.name=Arduino MKR GSM 1400
mkrgsm1400.vid.0=0x2341
mkrgsm1400.pid.0=0x8052
mkrgsm1400.vid.1=0x2341
mkrgsm1400.pid.1=0x0052
mkrgsm1400.upload.tool=bossac
mkrgsm1400.upload.protocol=sam-ba
mkrgsm1400.upload.maximum_size=262144
mkrgsm1400.upload.use_1200bps_touch=true
mkrgsm1400.upload.wait_for_upload_port=true
mkrgsm1400.upload.native_usb=true
mkrgsm1400.build.mcu=cortex-m0plus
mkrgsm1400.build.f_cpu=48000000L
mkrgsm1400.build.usb_product="Arduino MKR GSM 1400"
mkrgsm1400.build.usb_manufacturer="Arduino LLC"
mkrgsm1400.build.board=SAMD_MKRGSM1400
mkrgsm1400.build.core=arduino
mkrgsm1400.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags} -DUSE_BQ24195L_PMIC
mkrgsm1400.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mkrgsm1400.build.openocdscript=openocd_scripts/arduino_zero.cfg
mkrgsm1400.build.variant=mkrgsm1400
mkrgsm1400.build.vid=0x2341
mkrgsm1400.build.pid=0x8052
mkrgsm1400.bootloader.tool=openocd
mkrgsm1400.bootloader.file=mkrgsm1400/samd21_sam_ba_arduino_mkrgsm1400.bin
# Arduino MKR WAN 1300
# --------------------
mkrwan1300.name=Arduino MKR WAN 1300
mkrwan1300.vid.0=0x2341
mkrwan1300.pid.0=0x8053
mkrwan1300.vid.1=0x2341
mkrwan1300.pid.1=0x0053
mkrwan1300.upload.tool=bossac
mkrwan1300.upload.protocol=sam-ba
mkrwan1300.upload.maximum_size=262144
mkrwan1300.upload.use_1200bps_touch=true
mkrwan1300.upload.wait_for_upload_port=true
mkrwan1300.upload.native_usb=true
mkrwan1300.build.mcu=cortex-m0plus
mkrwan1300.build.f_cpu=48000000L
mkrwan1300.build.usb_product="Arduino MKR WAN 1300"
mkrwan1300.build.usb_manufacturer="Arduino LLC"
mkrwan1300.build.board=SAMD_MKRWAN1300
mkrwan1300.build.core=arduino
mkrwan1300.build.extra_flags=-D__SAMD21G18A__ {build.usb_flags}
mkrwan1300.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mkrwan1300.build.openocdscript=openocd_scripts/arduino_zero.cfg
mkrwan1300.build.variant=mkrwan1300
mkrwan1300.build.vid=0x2341
mkrwan1300.build.pid=0x8053
mkrwan1300.bootloader.tool=openocd
mkrwan1300.bootloader.file=mkrwan1300/samd21_sam_ba_arduino_mkrwan1300.bin
# Adafruit Circuit Playground M0
# ------------------------------
adafruit_circuitplayground_m0.name=Adafruit Circuit Playground Express
adafruit_circuitplayground_m0.vid.0=0x239A
adafruit_circuitplayground_m0.pid.0=0x8018
adafruit_circuitplayground_m0.vid.1=0x239A
adafruit_circuitplayground_m0.pid.1=0x0018
adafruit_circuitplayground_m0.upload.tool=bossac
adafruit_circuitplayground_m0.upload.protocol=sam-ba
adafruit_circuitplayground_m0.upload.maximum_size=262144
adafruit_circuitplayground_m0.upload.use_1200bps_touch=true
adafruit_circuitplayground_m0.upload.wait_for_upload_port=true
adafruit_circuitplayground_m0.upload.native_usb=true
adafruit_circuitplayground_m0.build.mcu=cortex-m0plus
adafruit_circuitplayground_m0.build.f_cpu=48000000L
adafruit_circuitplayground_m0.build.usb_product="Circuit Playground Express"
adafruit_circuitplayground_m0.build.usb_manufacturer="Adafruit"
adafruit_circuitplayground_m0.build.board=SAMD_CIRCUITPLAYGROUND_EXPRESS
adafruit_circuitplayground_m0.build.core=arduino
adafruit_circuitplayground_m0.build.extra_flags=-DCRYSTALLESS -DARDUINO_SAMD_ZERO -D__SAMD21G18A__ {build.usb_flags}
adafruit_circuitplayground_m0.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
adafruit_circuitplayground_m0.build.openocdscript=openocd_scripts/arduino_zero.cfg
adafruit_circuitplayground_m0.build.variant=circuitplay
adafruit_circuitplayground_m0.build.variant_system_lib=
adafruit_circuitplayground_m0.build.vid=0x239A
adafruit_circuitplayground_m0.build.pid=0x8018
adafruit_circuitplayground_m0.bootloader.tool=openocd
adafruit_circuitplayground_m0.bootloader.file=circuitplay/circuitplay_m0_samd21g18_sam_ba.bin
######################################################
#ARDUINO M0 PRO (WITH) BOOTLOADER - PROGRAMMING PORT
mzero_pro_bl_dbg.name=Arduino M0 Pro (Programming Port)
mzero_pro_bl_dbg.vid.0=0x03eb
mzero_pro_bl_dbg.pid.0=0x2111
mzero_pro_bl_dbg.upload.tool=openocd-withbootsize
mzero_pro_bl_dbg.upload.protocol=sam-ba
mzero_pro_bl_dbg.upload.maximum_size=262144
mzero_pro_bl_dbg.upload.use_1200bps_touch=false
mzero_pro_bl_dbg.upload.wait_for_upload_port=false
mzero_pro_bl_dbg.upload.native_usb=false
mzero_pro_bl_dbg.build.mcu=cortex-m0plus
mzero_pro_bl_dbg.build.f_cpu=48000000L
mzero_pro_bl_dbg.build.usb_product="Arduino M0 Pro"
mzero_pro_bl_dbg.build.board=SAM_ZERO
mzero_pro_bl_dbg.build.core=arduino
mzero_pro_bl_dbg.build.extra_flags=-D__SAMD21G18A__ -mthumb {build.usb_flags}
mzero_pro_bl_dbg.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mzero_pro_bl_dbg.build.openocdscript=openocd_scripts/arduino_zero.cfg
mzero_pro_bl_dbg.build.variant=arduino_mzero
mzero_pro_bl_dbg.build.variant_system_lib=
mzero_pro_bl_dbg.build.vid=0x2a03
mzero_pro_bl_dbg.build.pid=0x804f
mzero_pro_bl_dbg.build.preferred_out_format=hex
mzero_pro_bl_dbg.bootloader.size=0x4000
mzero_pro_bl_dbg.bootloader.tool=openocd-withbootsize
mzero_pro_bl_dbg.bootloader.cmd_unprotect=at91samd bootloader 0
mzero_pro_bl_dbg.bootloader.cmd_protect=at91samd bootloader 16384
mzero_pro_bl_dbg.bootloader.cmd_protect_verify=at91samd bootloader
mzero_pro_bl_dbg.bootloader.file=mzero/Bootloader_D21_M0_Pro_150427.hex
######################################################
#ARDUINO M0 PRO (WITH) BOOTLOADER - NATIVE PORT
mzero_pro_bl.name=Arduino M0 Pro (Native USB Port)
mzero_pro_bl.vid.0=0x2a03
mzero_pro_bl.pid.0=0x004d
mzero_pro_bl.vid.1=0x2a03
mzero_pro_bl.pid.1=0x804d
mzero_pro_bl.vid.2=0x2a03
mzero_pro_bl.pid.2=0x004f
mzero_pro_bl.vid.3=0x2a03
mzero_pro_bl.pid.3=0x804f
mzero_pro_bl.upload.tool=avrdude
mzero_pro_bl.upload.protocol=stk500v2
mzero_pro_bl.upload.maximum_size=262144
mzero_pro_bl.upload.use_1200bps_touch=true
mzero_pro_bl.upload.wait_for_upload_port=true
mzero_pro_bl.upload.native_usb=true
mzero_pro_bl.upload.speed=57600
mzero_pro_bl.build.mcu=cortex-m0plus
mzero_pro_bl.build.f_cpu=48000000L
mzero_pro_bl.build.usb_product="Arduino M0 Pro"
mzero_pro_bl.build.board=SAM_ZERO
mzero_pro_bl.build.core=arduino
mzero_pro_bl.build.extra_flags=-D__SAMD21G18A__ -mthumb {build.usb_flags}
mzero_pro_bl.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mzero_pro_bl.build.openocdscript=openocd_scripts/arduino_zero.cfg
mzero_pro_bl.build.variant=arduino_mzero
mzero_pro_bl.build.variant_system_lib=
mzero_pro_bl.build.vid=0x2a03
mzero_pro_bl.build.pid=0x804f
mzero_pro_bl.build.preferred_out_format=hex
mzero_pro_bl.bootloader.size=0x4000
mzero_pro_bl.build.emu.mcu=atmega2560
mzero_pro_bl.bootloader.tool=openocd-withbootsize
mzero_pro_bl.bootloader.file=mzero/Bootloader_D21_M0_Pro_150427.hex
mzero_pro_bl.bootloader.low_fuses=0xff
######################################################
#ARDUINO M0 (WITH) BOOTLOADER
mzero_bl.name=Arduino M0
mzero_bl.vid.0=0x2a03
mzero_bl.pid.0=0x004d
mzero_bl.vid.1=0x2a03
mzero_bl.pid.1=0x804d
mzero_bl.vid.2=0x2a03
mzero_bl.pid.2=0x004e
mzero_bl.vid.3=0x2a03
mzero_bl.pid.3=0x804e
mzero_bl.upload.tool=avrdude
mzero_bl.upload.protocol=stk500v2
mzero_bl.upload.maximum_size=262144
mzero_bl.upload.use_1200bps_touch=true
mzero_bl.upload.wait_for_upload_port=true
mzero_bl.upload.native_usb=true
mzero_bl.upload.speed=57600
mzero_bl.build.mcu=cortex-m0plus
mzero_bl.build.f_cpu=48000000L
mzero_bl.build.usb_product="Arduino M0"
mzero_bl.build.board=SAM_ZERO
mzero_bl.build.core=arduino
mzero_bl.build.extra_flags=-D__SAMD21G18A__ -mthumb {build.usb_flags}
mzero_bl.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
mzero_bl.build.openocdscript=openocd_scripts/arduino_zero.cfg
mzero_bl.build.variant=arduino_mzero
mzero_bl.build.variant_system_lib=
mzero_bl.build.vid=0x2a03
mzero_bl.build.pid=0x804e
mzero_bl.build.preferred_out_format=hex
mzero_bl.bootloader.size=0x4000
mzero_bl.build.emu.mcu=atmega2560
mzero_bl.bootloader.tool=openocd-withbootsize
mzero_bl.bootloader.low_fuses=0xff
mzero_bl.bootloader.file=mzero/Bootloader_D21_M0_150515.hex
######################################################
#ARDUINO TIAN (WITH) BOOTLOADER
tian.name=Arduino Tian
tian.upload.via_ssh=true
tian.vid.0=0x10C4
tian.pid.0=0xEA70
tian.descriptor.0=Enhanced Com Port
tian.upload.tool=avrdude
#tian.upload.protocol=stk500v2
tian.upload.protocol=wiring
tian.upload.maximum_size=262144
tian.upload.use_1200bps_touch=true
tian.upload.wait_for_upload_port=true
tian.upload.native_usb=true
tian.upload.speed=57600
tian.build.mcu=cortex-m0plus
tian.build.f_cpu=48000000L
tian.build.usb_product="Arduino Tian"
tian.build.board=SAMD_TIAN
tian.build.core=arduino
tian.build.extra_flags=-D__SAMD21G18A__ -mthumb {build.usb_flags}
tian.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
tian.build.openocdscript=openocd_scripts/arduino_zero.cfg
tian.build.variant=arduino_mzero
tian.build.variant_system_lib=
tian.build.vid=0x2a03
tian.build.pid=0x8052
tian.build.preferred_out_format=hex
tian.bootloader.size=0x4000
tian.build.emu.mcu=atmega2560
tian.bootloader.tool=openocd-withbootsize
tian.bootloader.low_fuses=0xff
tian.bootloader.file=sofia/Sofia_Tian_151118.hex
tian.drivers=SiliconLabs-CP2105/Silicon Labs VCP Driver.pkg
######################################################
#ARDUINO TIAN CONSOLE PORT (NOT FOR UPLOAD)
tian_cons.name=Arduino Tian (MIPS Console port)
tian_cons.vid.0=0x10C4
tian_cons.pid.0=0xEA70
tian_cons.descriptor.0=Standard Com Port
tian_cons.hide=true
tian_cons.build.board=SAMD_TIAN