device-interface-vital-signs.md

id	title	date	version	lastAuthor	mimeType	links	source	wikigdrive
1loA7Jvim_szKhdMqNVFK2GVtdFR2-dodvINyIdqtI7U	Device Interface - Vital Signs	2020-09-22T18:09:33.593Z	49	wreiske	text/x-markdown		https://drive.google.com/open?id=1loA7Jvim_szKhdMqNVFK2GVtdFR2-dodvINyIdqtI7U	0008bcbb1563384efe0a28ada6f97e9432e65f10

The following is referring to a Welch Allyn Spot Vital Signs monitor system. Contact your MIE Implementer to see if your vision system model can be interfaced or quoted.

Vital Signs

1. Open {{% system-name %}} .
2. Pull up the correct patient.
3. Add encounter for patient or add vitals by choosing the Vitals chart tab
4. Once Encounter has been added scroll down to Vitals section or enter in via Vitals chart tab. Make sure device mode is selected.

1. Select the Get readings button in {{% system-name %}}
   1. Vital signs will appear on page.
2. Select the add button for the correct set of vitals. (Note: if the device is being kept clean your results should be the only ones listed)
3. Select and submit button and vital signs will be saved to the encounter and appear on page.
4. Select the Clear Device button.
5. Scroll to the bottom of the page and select submit to save vital signs to chart.
6. Please note that for metrics the process above is the preferred method for entering vital signs
7. Take patient's vital signs.

1. Select the Get readings button.
   1. Vital signs will appear on page.
2. Select the add button for the correct set of vitals. (Note: if the device is being kept clean your results should be the only ones listed)
3. Select clear device and submit button
4. Vital signs will be saved to the encounter or Vitals chart tab and appear on page.