deps: copy all openssl header files to include dir

All symlink files in `deps/openssl/openssl/include/openssl/`
are removed and replaced with real header files to avoid
issues on Windows. Two files of opensslconf.h in crypto and
include dir are replaced to refer config/opensslconf.h.

PR-URL: #11021
Reviewed-By: Ben Noordhuis <[email protected]>

Author: shigeki

deps/openssl/openssl/crypto/opensslconf.h

@@ -1,265 +1 @@
-/* opensslconf.h */
-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-/* OpenSSL was configured with the following options: */
-#ifndef OPENSSL_DOING_MAKEDEPEND
-
-
-#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
-# define OPENSSL_NO_EC_NISTP_64_GCC_128
-#endif
-#ifndef OPENSSL_NO_GMP
-# define OPENSSL_NO_GMP
-#endif
-#ifndef OPENSSL_NO_JPAKE
-# define OPENSSL_NO_JPAKE
-#endif
-#ifndef OPENSSL_NO_KRB5
-# define OPENSSL_NO_KRB5
-#endif
-#ifndef OPENSSL_NO_LIBUNBOUND
-# define OPENSSL_NO_LIBUNBOUND
-#endif
-#ifndef OPENSSL_NO_MD2
-# define OPENSSL_NO_MD2
-#endif
-#ifndef OPENSSL_NO_RC5
-# define OPENSSL_NO_RC5
-#endif
-#ifndef OPENSSL_NO_RFC3779
-# define OPENSSL_NO_RFC3779
-#endif
-#ifndef OPENSSL_NO_SCTP
-# define OPENSSL_NO_SCTP
-#endif
-#ifndef OPENSSL_NO_SSL_TRACE
-# define OPENSSL_NO_SSL_TRACE
-#endif
-#ifndef OPENSSL_NO_SSL2
-# define OPENSSL_NO_SSL2
-#endif
-#ifndef OPENSSL_NO_STORE
-# define OPENSSL_NO_STORE
-#endif
-#ifndef OPENSSL_NO_UNIT_TEST
-# define OPENSSL_NO_UNIT_TEST
-#endif
-#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS
-# define OPENSSL_NO_WEAK_SSL_CIPHERS
-#endif
-
-#endif /* OPENSSL_DOING_MAKEDEPEND */
-
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
-#endif
-
-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
-   asks for it.  This is a transient feature that is provided for those
-   who haven't had the time to do the appropriate changes in their
-   applications.  */
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
-#  define NO_EC_NISTP_64_GCC_128
-# endif
-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
-#  define NO_GMP
-# endif
-# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
-#  define NO_JPAKE
-# endif
-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
-#  define NO_KRB5
-# endif
-# if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND)
-#  define NO_LIBUNBOUND
-# endif
-# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
-#  define NO_MD2
-# endif
-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-#  define NO_RC5
-# endif
-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
-#  define NO_RFC3779
-# endif
-# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
-#  define NO_SCTP
-# endif
-# if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE)
-#  define NO_SSL_TRACE
-# endif
-# if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
-#  define NO_SSL2
-# endif
-# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
-#  define NO_STORE
-# endif
-# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
-#  define NO_UNIT_TEST
-# endif
-# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS)
-#  define NO_WEAK_SSL_CIPHERS
-# endif
-#endif
-
-/* crypto/opensslconf.h.in */
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#undef RC4_CHUNK
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned long
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-#undef SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#define THIRTY_TWO_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units.  It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-#error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#undef DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <[email protected]>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
-   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
-   even newer MIPS CPU's, but at the moment one size fits all for
-   optimization options.  Older Sparc's work better with only UNROLL, but
-   there's no way to tell at compile time what it is you're running on */
-
-#if defined( __sun ) || defined ( sun )		/* Newer Sparc's */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#elif defined( __ultrix )	/* Older MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined( __osf1__ )	/* Alpha */
-#  define DES_PTR
-#  define DES_RISC2
-#elif defined ( _AIX )		/* RS6000 */
-  /* Unknown */
-#elif defined( __hpux )		/* HP-PA */
-  /* Unknown */
-#elif defined( __aux )		/* 68K */
-  /* Unknown */
-#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
-#  define DES_UNROLL
-#elif defined( __sgi )		/* Newer MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */
-#ifdef  __cplusplus
-}
-#endif
+#include "../../config/opensslconf.h"