Resolve Conflict

variants/atd35s3/pins_arduino.h

@@ -0,0 +1,78 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+static const uint8_t SS = 10;
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 13;
+static const uint8_t SCK = 12;
+
+// LCD pin
+#define LCD_CS  SS
+#define LCD_SCK SCK
+#define LCD_SDA MOSI
+static const uint8_t LCD_DC = 21;
+static const uint8_t LCD_RES = 14;
+static const uint8_t LCD_BL = 3;
+
+// MicroSD Card pin
+static const uint8_t SD_CS = 18;
+static const uint8_t SD_CD = 17;
+
+static const uint8_t BTN_A = 4;
+#define KEY_BUILTIN BTN_A
+
+static const uint8_t LED_BUILTIN = 5;
+
+// DAC pin
+static const uint8_t DAC_DIN = 47;
+static const uint8_t DAC_BCLK = 48;
+static const uint8_t DAC_WS = 45;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+#endif /* Pins_Arduino_h */

variants/cezerio_dev_esp32c6/pins_arduino.h

@@ -0,0 +1,52 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID          0x303A
+#define USB_PID          0x1001
+#define USB_MANUFACTURER "RFtek Electronics"
+#define USB_PRODUCT      "cezerio dev ESP32C6"
+#define USB_SERIAL       ""
+
+#define PIN_RGB_LED 3
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
+#define BUILTIN_LED   LED_BUILTIN  // backward compatibility
+#define LED_BUILTIN   LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API rgbLedWrite()
+#define RGB_BUILTIN   LED_BUILTIN
+#define RGBLED        LED_BUILTIN
+#define RGB_BRIGHTNESS 64
+
+static const uint8_t BUT_BUILTIN = 9;
+#define BUILTIN_BUT   BUT_BUILTIN  // backward compatibility
+#define BUT_BUILTIN   BUT_BUILTIN  // allow testing #ifdef BUT_BUILTIN
+#define BOOT          BUT_BUILTIN
+
+static const uint8_t TX = 16;
+static const uint8_t RX = 17;
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 7;
+
+static const uint8_t SS = 14;
+static const uint8_t MOSI = 22;
+static const uint8_t MISO = 23;
+static const uint8_t SCK = 21;
+
+static const uint8_t A0 = 0;
+static const uint8_t A1 = 1;
+static const uint8_t A2 = 2;
+static const uint8_t A3 = 3;
+static const uint8_t A4 = 4;
+static const uint8_t A5 = 5;
+static const uint8_t A6 = 6;
+
+static const uint8_t MATRIX = 18;
+
+static const uint8_t IMUSD = 8;
+static const uint8_t IMUSC = 7;
+
+#endif /* Pins_Arduino_h */

variants/ioxesp32c6/pins_arduino.h

@@ -0,0 +1,35 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define PIN_RGB_LED 8
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API rgbLedWrite()
+#define RGB_BUILTIN    LED_BUILTIN
+#define RGB_BRIGHTNESS 64
+
+static const uint8_t TX = 16;
+static const uint8_t RX = 17;
+
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 22;
+
+static const uint8_t SS = 18;
+static const uint8_t MOSI = 23;
+static const uint8_t MISO = 20;
+static const uint8_t SCK = 19;
+
+static const uint8_t A0 = 0;
+static const uint8_t A1 = 1;
+static const uint8_t A2 = 2;
+static const uint8_t A3 = 3;
+static const uint8_t A4 = 4;
+static const uint8_t A5 = 5;
+static const uint8_t A6 = 6;
+
+#endif /* Pins_Arduino_h */

variants/waveshare_esp32_s3_touch_lcd_4/pins_arduino.h

@@ -0,0 +1,73 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+// BN: ESP32 Family Device
+#define USB_VID 0x303a
+#define USB_PID 0x823D
+
+#define USB_MANUFACTURER "Waveshare"
+#define USB_PRODUCT      "ESP32-S3-Touch-LCD-4"
+#define USB_SERIAL       ""
+
+// UART0 pins
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// Def for I2C that shares the IMU I2C pins
+static const uint8_t SDA = -1;
+static const uint8_t SCL = -1;
+
+// Mapping based on the ESP32S3 data sheet - alternate for SPI2
+static const uint8_t SS = 34;    // FSPICS0
+static const uint8_t MOSI = 35;  // FSPID
+static const uint8_t MISO = 37;  // FSPIQ
+static const uint8_t SCK = 36;   // FSPICLK
+
+// Mapping based on the ESP32S3 data sheet - alternate for OUTPUT
+static const uint8_t OUTPUT_IO2 = 2;
+static const uint8_t OUTPUT_IO3 = 3;
+static const uint8_t OUTPUT_IO17 = 17;
+static const uint8_t OUTPUT_IO18 = 18;
+
+// Analog capable pins on the header
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+
+// GPIO capable pins on the header
+static const uint8_t D0 = 7;
+static const uint8_t D1 = 6;
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 4;
+static const uint8_t D4 = 3;
+static const uint8_t D5 = 2;
+static const uint8_t D6 = 1;
+static const uint8_t D7 = 44;
+static const uint8_t D8 = 43;
+static const uint8_t D9 = 40;
+static const uint8_t D10 = 39;
+static const uint8_t D11 = 38;
+static const uint8_t D12 = 37;
+static const uint8_t D13 = 36;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 34;
+static const uint8_t D16 = 33;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#endif /* Pins_Arduino_h */

variants/waveshare_esp32_s3_touch_lcd_43/pins_arduino.h

@@ -0,0 +1,116 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+// BN: ESP32 Family Device
+#define USB_VID 0x303a
+#define USB_PID 0x822E
+
+#define USB_MANUFACTURER "Waveshare"
+#define USB_PRODUCT      "ESP32-S3-Touch-LCD-4.3"
+#define USB_SERIAL       ""
+
+// display for ST7262
+#define WS_LCD_B3 14
+#define WS_LCD_B4 38
+#define WS_LCD_B5 18
+#define WS_LCD_B6 17
+#define WS_LCD_B7 10
+
+#define WS_LCD_G2 39
+#define WS_LCD_G3 0
+#define WS_LCD_G4 45
+#define WS_LCD_G5 48
+#define WS_LCD_G6 47
+#define WS_LCD_G7 21
+
+#define WS_LCD_R3 1
+#define WS_LCD_R4 2
+#define WS_LCD_R5 42
+#define WS_LCD_R6 41
+#define WS_LCD_R7 40
+
+#define WS_LCD_VSYNC 3
+#define WS_LCD_HSYNC 46
+#define WS_LCD_PCLK  7
+#define WS_LCD_DE    5
+
+// Touch for gt911
+#define WS_TP_SDA 8
+#define WS_TP_SCL 9
+#define WS_TP_RST -1
+#define WS_TP_INT 4
+
+//RS485
+#define WS_RS485_RXD 16
+#define WS_RS485_TXD 15
+
+//CAN
+#define WS_CAN_RXD 19
+#define WS_CAN_TXD 20
+
+//Onboard CH422G IO expander
+#define WS_CH422G_SDA 8
+#define WS_CH422G_SCL 9
+
+// UART0 pins
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// Def for I2C that shares the IMU I2C pins
+static const uint8_t SDA = 11;
+static const uint8_t SCL = 10;
+
+// Mapping based on the ESP32S3 data sheet - alternate for SPI2
+static const uint8_t SS = 34;    // FSPICS0
+static const uint8_t MOSI = 35;  // FSPID
+static const uint8_t MISO = 37;  // FSPIQ
+static const uint8_t SCK = 36;   // FSPICLK
+
+// Mapping based on the ESP32S3 data sheet - alternate for OUTPUT
+static const uint8_t OUTPUT_IO2 = 2;
+static const uint8_t OUTPUT_IO3 = 3;
+static const uint8_t OUTPUT_IO17 = 17;
+static const uint8_t OUTPUT_IO18 = 18;
+
+// Analog capable pins on the header
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+
+// GPIO capable pins on the header
+static const uint8_t D0 = 7;
+static const uint8_t D1 = 6;
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 4;
+static const uint8_t D4 = 3;
+static const uint8_t D5 = 2;
+static const uint8_t D6 = 1;
+static const uint8_t D7 = 44;
+static const uint8_t D8 = 43;
+static const uint8_t D9 = 40;
+static const uint8_t D10 = 39;
+static const uint8_t D11 = 38;
+static const uint8_t D12 = 37;
+static const uint8_t D13 = 36;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 34;
+static const uint8_t D16 = 33;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#endif /* Pins_Arduino_h */