CSHARP-4463: Add aws auth connectivity examples.

tests/MongoDB.Driver.Examples/Aws/AwsAuthenticationExamples.cs

@@ -0,0 +1,162 @@
+/* Copyright 2010-present MongoDB Inc.
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+
+using System;
+using MongoDB.Bson;
+using MongoDB.TestHelpers.XunitExtensions;
+using Xunit;
+
+namespace MongoDB.Driver.Examples.Aws
+{
+    /// <summary>
+    /// Atlas preconditions for local run:
+    /// 1. Configure AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and optionally AWS_SESSION_TOKEN. If used, AWS_SESSION_TOKEN should be regenerated periodically.
+    /// You may use `Command line or programmatic access` page on awsapps.com
+    /// 2. Configure credentials folder here: c:\Users\{user}\.aws\
+    /// 3. Get your arn via `get-caller-identity`:
+    /// ./aws sts get-caller-identity
+    ///{
+    ///    "UserId": "%ID%:[[email protected]]",
+    ///    "Account": "%ID_VALUE%",
+    ///    "Arn": "arn:aws:sts::%ID_VALUE%:assumed-role/%ROLE_NAME%/[[email protected]]"
+    /// }
+    /// pay attention on %ROLE_NAME%.
+    /// 4. list all roles via:.
+    /// $ ./aws iam list-roles
+    /// {
+    ///     "Roles": [
+    ///     {
+    ///             "Path": "..",
+    ///             "RoleName": "%ROLE_NAME%",
+    ///             "Arn": "arn:aws...:
+    ///        ...
+    ///  in the provided roles, search for a record with a RoleName equal to %ROLE_NAME% and record his arn.
+    ///  5. In your atlas cluster, create a new user with AWS authentication and set AWS IAM Role ARN from #4.
+    ///  6. Then configure a MongoClient in the same way as it's done in these examples with MONGODB-AWS auth credentials.
+    ///
+    /// Additional notes:
+    /// 1. To work with authentications that are not based on env vars credentials configuration, make sure that AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY and AWS_SESSION_TOKEN are not set
+    /// 2. To work with aws profile make sure that env variable AWS_PROFILE has appropriate value if the used aws profile is not default
+    /// 3. To work with ECS container credentials make sure that AWS_CONTAINER_CREDENTIALS_RELATIVE_URI or AWS_CONTAINER_CREDENTIALS_FULL_URI has appropriate value
+    /// 4. To work with EC2 container credentials from EC2 instance metadata make sure a test is launched on EC2 env and AWS_CONTAINER_CREDENTIALS_* is not set
+    /// 5. To work with Aws WebIdentityToken make sure that AWS_WEB_IDENTITY_TOKEN_FILE, AWS_ROLE_ARN and AWS_ROLE_SESSION_NAME are configured
+    /// </summary>
+    public class AwsAuthenticationExamples
+    {
+        private static readonly string __connectionStringHosts = "<host_address>";
+
+        [Fact]
+        public void ConnectionStringAuthConfiguration()
+        {
+            // the test uses env variables only to initialize userName, password and awsSessionToken
+            RequireEnvironment
+                .Check()
+                .EnvironmentVariable("AWS_ACCESS_KEY_ID")
+                .EnvironmentVariable("AWS_SECRET_ACCESS_KEY")
+                .EnvironmentVariable("AWS_SESSION_TOKEN");
+
+            // Start explicit aws credentials configuring via connection string
+            var username = Environment.GetEnvironmentVariable("AWS_ACCESS_KEY_ID");
+            var password = Environment.GetEnvironmentVariable("AWS_SECRET_ACCESS_KEY");
+            var awsSessionToken = Environment.GetEnvironmentVariable("AWS_SESSION_TOKEN");
+
+            // AWS_SESSION_TOKEN is optional. If you do not need to specify an AWS session token, omit the authMechanismProperties parameter and his value.
+            var connectionString = $"mongodb+srv://{username}:{password}@{__connectionStringHosts}?authSource=$external&authMechanism=MONGODB-AWS&authMechanismProperties=AWS_SESSION_TOKEN:{awsSessionToken}";
+            var mongoClientSettings = MongoClientSettings.FromConnectionString(connectionString);
+            var client = new MongoClient(mongoClientSettings);
+            // End explicit aws credentials configuring via connection string
+
+            RunHello(client);
+        }
+
+        [Fact]
+        public void ConnectionStringAuthConfiguration_with_auto_fetching_env_variables()
+        {
+            // the test uses env variables fetched inside the driver behind the scene.
+            // Auto fetching can happen not only from env variables, but adding only a check for them as a simplest guard
+            RequireEnvironment
+                .Check()
+                .EnvironmentVariable("AWS_ACCESS_KEY_ID")
+                .EnvironmentVariable("AWS_SECRET_ACCESS_KEY")
+                .EnvironmentVariable("AWS_SESSION_TOKEN");  // optional
+
+            // Start aws authentication configuring via connection string with implicit credentials fetching
+            var connectionString = $"mongodb+srv://{__connectionStringHosts}?authSource=$external&authMechanism=MONGODB-AWS";
+            var mongoClientSettings = MongoClientSettings.FromConnectionString(connectionString);
+            var client = new MongoClient(mongoClientSettings);
+            // End aws authentication configuring via connection string with implicit credentials fetching
+
+            RunHello(client);
+        }
+
+
+        [Fact]
+        public void MongoClientSettingsAuthConfiguration()
+        {
+            // the test uses env variable only to initialize userName, password and awsSessionToken
+            RequireEnvironment
+                .Check()
+                .EnvironmentVariable("AWS_ACCESS_KEY_ID")
+                .EnvironmentVariable("AWS_SECRET_ACCESS_KEY")
+                .EnvironmentVariable("AWS_SESSION_TOKEN");
+
+            // Start explicit aws credentials configuring via MongoCredential
+            var username = Environment.GetEnvironmentVariable("AWS_ACCESS_KEY_ID");
+            var password = Environment.GetEnvironmentVariable("AWS_SECRET_ACCESS_KEY");
+            var awsSessionToken = Environment.GetEnvironmentVariable("AWS_SESSION_TOKEN");
+
+            // AWS_SESSION_TOKEN is optional. If you do not need to specify an AWS session token, omit calling WithMechanismProperty method.
+            var awsCredentials = new MongoCredential("MONGODB-AWS", new MongoExternalIdentity(username), new PasswordEvidence(password))
+                .WithMechanismProperty("AWS_SESSION_TOKEN", awsSessionToken);
+
+            var mongoClientSettings = MongoClientSettings.FromConnectionString($"mongodb+srv://{username}:{password}@{__connectionStringHosts}");
+            mongoClientSettings.Credential = awsCredentials;
+            mongoClientSettings.ServerApi = new ServerApi(ServerApiVersion.V1, strict: true);
+            var client = new MongoClient(mongoClientSettings);
+            // End explicit aws credentials configuring via MongoCredential
+
+            RunHello(client);
+        }
+
+        [Fact]
+        public void MongoClientSettingsAuthConfiguration_with_auto_fetching_env_variables()
+        {
+            // the test uses env variables fetched inside the driver behind the scene.
+            // Auto fetching can happen not only from env variables, but adding only a check for them as a simplest guard
+            RequireEnvironment
+                .Check()
+                .EnvironmentVariable("AWS_ACCESS_KEY_ID")
+                .EnvironmentVariable("AWS_SECRET_ACCESS_KEY")
+                .EnvironmentVariable("AWS_SESSION_TOKEN");  // optional
+
+            // Start aws authentication configuring via MongoClientSettings with implicit credentials fetching
+            var awsCredentials = new MongoCredential("MONGODB-AWS", new MongoExternalAwsIdentity(), new ExternalEvidence());
+
+            var mongoClientSettings = MongoClientSettings.FromConnectionString($"mongodb+srv://{__connectionStringHosts}");
+            mongoClientSettings.Credential = awsCredentials;
+            mongoClientSettings.ServerApi = new ServerApi(ServerApiVersion.V1, strict: true);
+            var client = new MongoClient(mongoClientSettings);
+            // End aws authentication configuring via MongoClientSettings with implicit credentials fetching
+
+            RunHello(client);
+        }
+
+        // private methods
+        private void RunHello(IMongoClient client)
+        {
+            client.GetDatabase(DatabaseNamespace.Admin.DatabaseName).RunCommand<BsonDocument>("{ hello : 1 }");
+        }
+    }
+}