CI: rfl: add more tools and steps #128928
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
rustbot
added
A-testsuite
|
@bors try |
12 tasks
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Aug 10, 2024
CI: rfl: add more tools and steps This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use. Please see the individual commits for a few details. Cc: `@GuillaumeGomez` `@tgross35` r? `@Kobzol` try-job: x86_64-rust-for-linux
This comment has been minimized.
This comment has been minimized.
|
💔 Test failed - checks-actions |
bors
added
S-waiting-on-author
Signed-off-by: Miguel Ojeda <[email protected]>
Apparently tools like `rustfmt` require it in order to find the right `librustc_driver.so` without extra tweaks. Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
This change will also remove the current warnings in the build due to
`rustfmt` not being available (for `bindgen` output):
error: 'rustfmt' is not installed for the custom toolchain 'local'.
note: this is a custom toolchain, which cannot use `rustup component add`
help: if you built this toolchain from source, and used `rustup toolchain link`, then you may be able to build the component with `x.py`
Failed to run rustfmt: Internal rustfmt error (non-fatal, continuing)
Signed-off-by: Miguel Ojeda <[email protected]>
This particular target does not expand into much code, so it is a good first candidate to see if we could keep this in the CI. Signed-off-by: Miguel Ojeda <[email protected]>
It will make it easier to add more in the future. Signed-off-by: Miguel Ojeda <[email protected]>
ojeda
force-pushed
the
ci-rfl-more-tools
branch
from
9c011ce to
778ff06
Compare
|
@bors try |
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Aug 28, 2024
CI: rfl: add more tools and steps This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use. Please see the individual commits for a few details. Cc: `@GuillaumeGomez` `@tgross35` r? `@Kobzol` try-job: x86_64-rust-for-linux
|
☀️ Try build successful - checks-actions |
|
@Kobzol Moving to |
|
This should work with just stage 1. The fact that |
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Sep 4, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Signed-off-by: Miguel Ojeda <[email protected]>
|
Ok fixing this "bug" (it's probably intended at the moment) would amount to rewriting half of bootstrap, apparently. So let's just use stage2 for now. @bors r+ |
bors
added
S-waiting-on-bors
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 16, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 18, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 29, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 29, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 3, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
alyssarosenzweig
pushed a commit
to alyssarosenzweig/linux
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Mar 7, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Mar 7, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
github-actions bot
pushed a commit
to anon503/linux
that referenced
this pull request
Mar 10, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to anon503/linux
that referenced
this pull request
Mar 10, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to anon503/linux
that referenced
this pull request
Mar 10, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
gregkh
pushed a commit
to gregkh/linux
that referenced
this pull request
Mar 13, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <[email protected]> Reviewed-by: Trevor Gross <[email protected]> Tested-by: Gary Guo <[email protected]> Reviewed-by: Gary Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use.
Please see the individual commits for a few details.
Cc: @GuillaumeGomez @tgross35
r? @Kobzol
try-job: x86_64-rust-for-linux